- 首页
- 产品中心
-
-
- 集成电路 Integrated Circuits (ICs)
- 模拟引擎 Analog Engine
- 模拟开关 Analog Switch
- 音频放大器 Audio Amplifiers
- 音频转换器 Audio Converters
- 音频开关 Audio Switch
- D类放大器 Class D Amplifiers
- 比较器 Comparators
- 数字信号处理器 Digital Signal Processors (DSP)
- 麦克风增益控制器 Microphone Gain Controllers
- LED驱动器 LED Drivers
- 线路驱动器 Line Driver
- 平衡线路接收器 Balanced Line Receivers
- MEMS麦克风 MEMS Microphones
- 麦克风前置放大器 Microphone Pre-amplifiers
- 运算放大器 Operational Amplifiers
- 石英振荡器驱动器 Quartz Oscillator Drivers
- 压电驱动器 Piezo Drivers
- 通讯 Telephony
- 压控放大器 Voltage Controlled Amplifiers (VCA)
- 音量控制 Volume Control
- 晶振IC Crystal Oscillator IC's
- 传感器 Sensor Signal Interface
- 集成电路 Integrated Circuits (ICs)
-
-
- 代理品牌
- 应用领域
-
- 关于我们
- 新闻资讯
- 联系我们
- 企业店铺
THAT1250S08-U 平衡线路接收器
- 低成本 INA134 SSM2141
- 宽带宽(>24MHz 典型值)
- 低失真(典型值 0.0006%)
- 低噪声(-103dBu 典型值)
- 低电流(2 mA 典型值)
技术规格
电源电压(最低) Supply Voltage (minimum) | ±3V |
电源电压(最大) Supply Voltage (maximum) | ±18V |
电源电流 Supply Current | 2mA |
增益 Gain | 0dB |
共模抑制 Common Mode Rejection | 50dB |
具有600Ω源失配的CMR CMR with 600Ω source mismatch | 30dB |
总谐波失真 Total Harmonic Distortion | 0.0006% |
输出噪声 Output Noise | -103dBu |
电源抑制 Power Supply Rejection | 90dB |
电路数 Number of Circuits | 1 |
详细描述
THAT1250 精密差分放大器主要用作音频平衡线路接收器。
该器件通过关键引脚上的二极管钳位保护免受 EOS/ESD 影响,使其成为实际产品的可靠替代品。
该器件具有 0dB 增益、50dB 典型共模抑制、12V/us 压摆率、20MHz 带宽和 0.0006% THD。
THAT1250 提供分立设计的声音优势,以及完全集成解决方案的紧凑尺寸、可靠性、匹配和热跟踪。
The THAT1250 precision differential amplifier is designed primarily for use as an audio balanced line receiver.
The device is protected from EOS/ESD by diode clamps on critical pins making it a reliable alternative for real-world products.
The device exhibits a gain of 0dB, 50dB of typical common-mode rejection, a slew rate of 12 V/us, a 20MHz bandwidth, and 0.0006% THD.
The THAT1250 provides the sonic benefit of discrete designs, with the compact size, reliability, matching, and thermal tracking of a fully integrated solution.