- 首页
- 产品中心
-
-
- 集成电路 Integrated Circuits (ICs)
- 模拟引擎 Analog Engine
- 模拟开关 Analog Switch
- 音频放大器 Audio Amplifiers
- 音频转换器 Audio Converters
- 音频开关 Audio Switch
- D类放大器 Class D Amplifiers
- 比较器 Comparators
- 数字信号处理器 Digital Signal Processors (DSP)
- 麦克风增益控制器 Microphone Gain Controllers
- LED驱动器 LED Drivers
- 线路驱动器 Line Driver
- 平衡线路接收器 Balanced Line Receivers
- MEMS麦克风 MEMS Microphones
- 麦克风前置放大器 Microphone Pre-amplifiers
- 运算放大器 Operational Amplifiers
- 石英振荡器驱动器 Quartz Oscillator Drivers
- 压电驱动器 Piezo Drivers
- 通讯 Telephony
- 压控放大器 Voltage Controlled Amplifiers (VCA)
- 音量控制 Volume Control
- 晶振IC Crystal Oscillator IC's
- 传感器 Sensor Signal Interface
- 集成电路 Integrated Circuits (ICs)
-
-
- 代理品牌
- 应用领域
-
- 关于我们
- 新闻资讯
- 联系我们
- 企业店铺
![to3 Render ECF10N20 ECF10P20 ECF20N20 ECF20P20 to3 Render ECF10N20 ECF10P20 ECF20N20 ECF20P20](http://cdn.baofuxin.cn/wp-content/uploads/2021/08/to3-Render-ECF10N20-ECF10P20-ECF20N20-ECF20P20.png)
![ECF20P20-s1 ECF20P20-s1](http://cdn.baofuxin.cn/wp-content/uploads/2021/08/ECF20P20-s1-300x300.jpg)
![ECF20P20-s2 ECF20P20-s2](http://cdn.baofuxin.cn/wp-content/uploads/2021/08/ECF20P20-s2-300x300.jpg)
![ECF20P20-s3 ECF20P20-s3](http://cdn.baofuxin.cn/wp-content/uploads/2021/08/ECF20P20-s3-300x300.jpg)
ECF20P20-S 金封MOSFET大功率音频功放对管
- 专为音频放大器应用而设计
- 高导热性
- 优异的频率特性
- 集成保护二极管
- 不受电流集中的影响,因此对电破坏具有很高的抵抗力。
- 本质上防止短路故障条件和热失控的温度特性。
- ECF20N20 的补充
技术规格
类型 Type | Pch |
漏-源极电压 Drain Source Voltage | -200V |
漏极电流 Drain Current | -16A |
栅-源极电压 Gate-Source Voltage | ±14V |
功率 Power | 250W |
详细描述
EXICON Mosfets 专为高功率线性应用而设计。
它们提供高电压能力、高转换率和低失真,使它们成为音频放大器设计的理想选择。
无二次击穿和热失控,使它们非常可靠,并且无需保护电路。
这些优势连同宽带宽、低驱动要求和易于并联,使得具有出色声音特性的稳健放大器的简单构造成为可能。
ECF20P20 是 BUZ905D、BUZ906D、ALF16P16K 或 ALF16P20K 的合适等效物、替代品或代替品。
S 版本已经过测试并根据如下所示的技术规格分级为色带,以确保紧密匹配。我们不能根据要求保证特定的色带,但订单将从相同的色带提供。如果您有特殊要求,请在订购前与我们联系。
EXICON Mosfets have been designed specifically for high power linear use.
They offer high voltage capability, high slew rate and low distortion, making them the ideal choice for audio amplifier design.
Freedom from secondary breakdown and thermal runaway make them extremely reliable and remove the need for protection circuitry.
These advantages together with wide bandwidth, low drive requirements, and ease of paralleling make it possible for the simple construction of robust amplifiers with excellent sonic characteristics.
The ECF20P20 is a suitable equivalent, replacement or substitute for the BUZ905D, BUZ906D, ALF16P16K or ALF16P20K.
The S version has been tested and graded into colour bands based on the technical spec shown below to ensure close matching. We cannot guarantee a specific colour band upon request but orders will be supplied from the same colour band. If you have a particular requirement, please contact us before ordering.